Danh mục

● 2x2 MIMO with two spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support

802.11ac

● 2x2 downlink MU-MIMO with two spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 866.7 Mbps (2x2 80 MHz on 5 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● Wi-Fi Protected Access (WPA) 3 support

802.11ax

● 2x2 uplink/downlink MU-MIMO with two spatial streams (6 GHz)
● 2x2 downlink MU-MIMO with two spatial streams (2.4 GHz and 5 GHz)
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80-, and 160-MHz channels (6 GHz)
● 20-, 40-, and 80-MHz channels (5 GHz)
● 20-MHz channels (2.4 GHz)
● PHY data rates up to 3.9 Gbps (2x2 160 MHz on 6 GHz, 2x2 80 MHz on 5 GHz, and 2x2 20 MHz on 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support

Integrated antenna

● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
● 6 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces

● 1x 100M/1000M/2.5G Multigigabit Ethernet (RJ-45) port
● Management console port (RJ-45)
● USB 2.0 at 4.5W

Indicators

● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H)

● Access point (without mounting brackets): 200 x 200 x 44.45 mm

Weight

● 2.05 lb. (0.93 kg)

Input power requirements

● 802.3bt, Cisco Universal PoE (Cisco UPOE ®), 802.3at Power over Ethernet Plus (PoE+)
● Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6
● 802.3af PoE (for 802.3af, see the matrix below for radio configuration)
● DC power input (12V/ MA-PWR-30W)

PoE power consumption	2.4-GHz radio	5-GHz radio	6-GHz radio, low power indoor (LPI)	Link speed	USB	Link Layer Discovery Protocol (LLDP)
802.3bt (UPOE)	2x2	2x2	2x2	2.5G	Y (4.5W)	25.5W
802.3at (PoE+)	2x2	2x2	2x2	2.5G	Y (4.5W)	25.5W
802.3af (PoE)	–	1x1	1x1	1G	N	13.3W
DC power (30W)	2x2	2x2	2x2	2.5G	Y (4.5W)	–

Environmental

● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m)
● Operating temperature: 32° to 122°F (0° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)

System memory

● 2048 MB DRAM
● 1024 MB flash

Available transmit power settings

2.4 GHz

● 20 dBm (100 mW)

● -7 dBm (0.20 mW)

5 GHz

● 20 dBm (100 mW)

● -7 dBm (0.20 mW)

6 GHz

● 20 dBm (100 mW)

● -7 dBm (0.20 mW)