31 Đường số 9, KDC Cityland, P.10, Q.Gò Vấp, TP.HCM
028 62578355
HOTLINE
0909648899  
028 62578355
Trang chủ > Sản phẩm > Thiết bị mạng Cisco > Wireless Cisco > Cisco C9136I-ROW

Cisco C9136I-ROW

Cisco C9136I-ROW Bộ phát Wi-Fi 6E Indoor với 8x8 MU-MIMO và ROW domain

  • Hoạt động trên ba băng tần 2.4GHz, 5GHz và  6 GHz
  • Tốc độ Wi-Fi: 1.5 Gbps (802.11n); 3.4 Gbps (802.11ac);  10.2 Gbps (802.11ax)
  • Giao diện: 2 x 5Gbps (RJ-45), 1 x Mgmt port (RJ-45), 1 x USB 2.0
  • Bộ nhớ: DRAM 2048MB, Flash 1024MB
  • Anten tích hợp bên trong (internal)
  • Nguồn: 802.3bt (UPOE)
  • Giá bán : Liên hệ để có giá tốt
  • Tình trạng : Còn hàng


Cisco C9136I-ROW thuộc dòng Catalyst 9136 Wi-Fi 6E, tận dụng ưu thế của băng tần 6 GHz để tạo ra một mạng đáng tin cậy và an toàn hơn, cung cấp thông lượng cao và ít nhiễu thiết bị hơn. C9136I-ROW hỗ trợ ba radio: 4x4 6 GHz, 8x8 5 GHz và 4x4 2,4 GHz. Công nghệ Wi-Fi 6E mở rộng Wi-Fi 6 vào phổ tần 6 GHz, mang lại tốc độ nhanh hơn và độ trễ thấp hơn đồng thời cung cấp bảo mật hơn cho mạng.

Điểm nổi bật Cisco C9136I-ROW

  • Chuẩn IEEE 802.11ax, mang lại trải nghiệm tốt hơn cho các ứng dụng như video 4K hoặc 8K. Wi-Fi 6E là Wi-Fi 6 "mở rộng" thành băng tần 6 GHz.
  • Hỗ trợ ba radio: 4x4 6 GHz, 8x8 5 GHz và 4x4 2,4 GHz.
  • Tốc độ Wi-Fi: 1.5 Gbps (802.11n); 3.4 Gbps (802.11ac);  10.2 Gbps (802.11ax)
  • Giao diện: 2 x 5Gbps mGig, 1 x Mgmt Console (RJ-45), 1 x USB 2.0
  • Bộ nhớ: DRAM 2048MB, Flash 1024MB
  • Anten tích hợp bên trong (internal)
  • Công nghệ OFDMA, MU-MIMO, BSS, TWT
  • Hỗ trợ phần mềm Cisco DNA, lưu trữ ứng dụng trên AP giúp đơn giản hóa việc triển khai IoT
  • Tích hợp Bluetooth Low Energy (BLE) 5

Thông số kỹ thuật Cisco C9136I-ROW

Model C9136I-ROW
Software ● Cisco IOS ® XE Software Release 17.7.1 or later
Supported wireless LAN controllers ● Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)
802.11n version 2.0 (and related) capabilities ● 4x4 MIMO with four spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 1.5 Gbps (40 MHz with 5-GHz and 20 MHz with 2.4-GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
802.11ac ● 8x8 downlink MU-MIMO with eight spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80-, and 160-MHz channels
● PHY data rates up to 3.4 Gbps (8x8 80 MHz or dual 4x4 80+80 MHz on 5-GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● Cyclic Shift Diversity (CSD) support
● Wi-Fi Protected Access (WPA) 3 support
802.11ax ● 8x8 uplink/downlink MU-MIMO with eight spatial streams (5-GHz)
● 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6-GHz)
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80-, and 160-MHz channels (6-GHz)
● 20-, 40-, 80-, 80+80-MHz (5-GHz)
● 20-MHz channels (2.4-GHz)
● PHY data rates up to 10.2 Gbps (4x4 160 MHz on 6 GHz, 8x8 80 MHz on 5-GHz, and 4x4 20 MHz on 2.4-GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
Integrated antenna ● 2.4-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5-GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
● 6-GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
Interfaces ● 2 x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45)
● Management console port (RJ-45)
● USB 2.0 at 9W
Indicators ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H) ● Access point (without mounting brackets): 25.1 x 25.1 x 5.6 cm
Weight ● 1.65 kg
Input power requirements ● 802.3bt Cisco Universal PoE (Cisco UPOE ®), 802.3at Power over Ethernet Plus (PoE+)
● Cisco power injector, AIR-PWRINJ7=
● 802.3af PoE (only for configuration staging, all radios off)
Power Source 2.4-GHz radio 5-GHz radio 6-GHz radio Link speed USB Max PoE Power Consumption
802.3bt (UPOE) 4x4 8x8 4x4 2x 5G Y(9W) 47.3W
802.3at (PoE+) 2x2 2x2 4x4 1x 2.5G N 24.4W
802.3af (PoE) 1x 1G N 13.95W
Environmental ● Nonoperating (storage) temperature: -30° to 70°C
● Nonoperating (storage) altitude test: 25˚C at 4600 m
● Operating temperature: 0° to 50°C
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C at 3000 m
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 8x8 to 4x4 on the 5-GHz radio, and uplink Ethernet will downgrade to a single 1G; however, the USB interface will remain enabled.
System memory ● 2048 MB DRAM
● 1024 MB flash
Available transmit power settings
2.4 GHz ● 23 dBm (200 mW)
● -4 dBm (0.39 mW)
5 GHz ● 26 dBm (400 mW)
● -1 dBm (0.79 mW)
6 GHz ● 23 dBm (200 mW)
● -4 dBm (0.39 mW)
Note: In countries where use of the 6 GHz band is not allowed or there is no current software support, the 6 GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.

C9136I-ROW : Cisco Catalyst 9136I Series, Internal Antennas

Data sheet Cisco Catalyst 9136 Series Access Points

Sản phẩm liên quan

Cisco C9115AXI-S

Cisco C9115AXI-S Bộ phát Wi-Fi 6 Indoor với 4x4...

Liên hệ để có giá tốt

Cisco C9120AXI-S

Cisco C9120AXI-S Bộ phát Wi-Fi 6 Indoor với 4x4...

Liên hệ để có giá tốt

Cisco C9130AXI-S

Cisco C9130AXI-S Bộ phát Wi-Fi 6 Indoor với 8x8...

Liên hệ để có giá tốt

Cisco C9105AXI-S

Cisco C9105AXI-S Bộ phát Wi-Fi 6 Indoor với 2x2...

Liên hệ để có giá tốt

Cisco C9124AXI-ROW

Cisco C9124AXI-ROW Bộ phát Wi-Fi 6 Outdoor với...

Liên hệ để có giá tốt

Cisco C9130AXI-EWC-S

Cisco C9130AXI-EWC-S Bộ phát Wi-Fi 6 Indoor tích...

Liên hệ để có giá tốt

Hỗ trợ trực tuyến