| Model |
SmartZone 300 |
| Capacity |
| Managed APs |
· Up to 10,000 per controller
· Up to 30,000 per cluster |
| Managed Switches |
· Up to 2,000 per controller
· Up to 6,000 per cluster |
| WLANs |
· Up to 2,048 per zone
· Up to 65,534 per cluster |
| VLANS |
· Up to 4,094 |
| Concurrent Devices |
· Up to 150,000 per SZ300
· Up to 450,000 per SZ300 cluster |
| Key functionality |
| Device Management |
· RUCKUS Wi-Fi APs supported: R850, R750, R730, R720, R710, R650, R610, R550, R510, R320, R310, M510, H510, H320, C110, E510, T811CM, T750, T710, T710S, T610, T610S, T504, T310, T301, FZM300, FZP300
· RUCKUS ICX 7000 series switches running FastIron 8.0.80 and above supported; FastIron 80.0.90a required for Zero-Touch Provisioning |
| Device Type Support |
· Wi-Fi APs, Switches |
| Controller Expansion |
· Up to 4 controllers in N+1 active-active mode, supporting non-disruptive capacity expansion |
| Controller Redundancy |
· 3+1 distributed data preserving with N+1 redundancy within a cluster |
| Cluster Redundancy |
· Geo-redundancy between clusters; many-to-one cluster support |
| Data Offload |
· Local offload of traffic directly to the Internet |
| AP |
· WPA, WPA2-AES, 802.11i, 802.1x/EAP, PSK, WISPr, WEP, WPA3, Enhanced Open, MAC Address*
· Fast EAP-SIM re-authentication
· EAP-SIM, EAP-AKA, EAP-AKA over WLAN for 802.1x
· Wi-Fi Locations with the SZ AAA-Proxy functionality enabled |
| User Database |
· Internal database up to 25,000 users
· External: RADIUS, LDAP, Active Directory |
| Access Control |
· L2 (MAC address-based)L3/4 (IP and Protocol based)
· L2 client isolation
· Management interface access control
· Time-based WLANs
· Device type access policies
· Two-factor authentication password, SMS |
| Wireless Intrusion Detection (WIDS/WIPS) |
· Rogue AP detection / prevention
· Evil-twin/AP spoofing detection
· Ad hoc detection |
| AAA |
· RADIUS (primary and backup) |
| Hotspot |
· WISPr, Wi-Fi CERTIFIED, Passpoint™, HotSpot 2.0* |
| Guest Access |
· Supported |
| Captive Portal |
· Supported |
| Mesh |
· Self-healing, Self-forming, Zero-touch provisioning |
| DHCP Server |
· Up to 100,000 IP address leases per vSZ-D (in increments of 1,000 IP address leases) |
| NAT |
· Up to 2 million sessions flows per vSZ-D (in increments of 100,000 session flows) |
| Media |
· 802.11e/WMM, U-APSD, Wi-Fi Calling Prioritization* |
| mDNS Bonjour Fencing |
· Supported |
| WISPr |
· WISPr authentication, SZ downlink AP Survivability* |
| Software Queues |
· Per traffic type (4), per client |
| SmartCast Traffic Classification |
· Automatic, heuristics and TOS based or VLAN-defined |
| Rate Limiting |
· Supported |
| WLAN Prioritization |
· Supported |
| Client Load Balancing |
· Automatic |
| Band Load Balancing |
· Supported |
| AP Provisioning |
· L3 or L2 auto-discovery
· Auto-software upgrade
· Automatic channel optimization |
| Configuration Management |
· Secure multi-operator login (RBAC)
· Large scale (bulk) AP management tools
· Switch software and firmware upgrades
· Switch configuration management to be supported in an upcoming SmartZone release
· Per zone firmware versioning control
· Configuration audit trails
· Alarm and event notification (SNMP V1 / V2 / V3)
· Event Logging (Syslog)
· Integrated on-board remote accessible EMS functionality
· RESTful APIs (JSON)
· Web-UI
· CLI |
| Physical characteristics |
| Power |
· Dual (redundant) AC or DC hot-swappable power supplies
· DC power consumption: 1400W
· Power Rating: -36 to -72VDC
· AC power consumption: 1500W
· Power Rating: 100-127VAC/200-240VAC, 47-63HZ |
| Dimensions |
· 2RU rack mountable: 430 mm (W) x 518 mm (D) x 88.6 mm (H); 16.93 in (W) x 20.4 in (D) x 3.48 in (H) |
| Weight |
· 24.3 kg; 53.6 lbs |
| Connections |
· Control, management, cluster ports
· Six 10/100/1000 Mbps, RJ-45 ports
· Data: Four 10Gbps data ports (SFP+)
· Console ports: two RJ-45, one front, one rear
· USB ports: two front, two rear
· Serial port |
| SZ300 LED |
· Front panel LEDs, one rear LED |
| SZ300 Fans |
· Six redundant, field-swappable fans in three sets |
| Mean-Time-Between-Failure (MBTF) |
at 25C:
· AC version: 44126 hours
· DC version: 39094 hours |
| Environmental Conditions |
· Operating Temperature: 5°C (41°F) – 55°C (131°F)Operating Humidity: 5% to 85%, non-condensing
· Humidity storage: 95%, non-condensing |