| Model |
Ruckus SmartZone 144 |
| Capacity |
| Managed APs |
· Up to 2,000 per controller
· Up to 6,000 per cluster |
| Managed Switches |
· Up to 400 per controller
· Up to 1200 per cluster |
| WLANs |
· Up to 2,048 |
| VLANS |
· Up to 4,096 |
| Concurrent Devices |
· Up to 40,000 per controller
· Up to 120,000 per cluster |
| Key Functionality |
| Device Management |
· RUCKUS Wi-Fi APs supported: R850, R750, R730, R720, R710, R650, R610, R550, R510, R320, R310, M510, H510, C110, H320, E510, T811CM, T750, T750SE, T710, T710S, T610, T610S, T504, T310, T301, FZM300, FZP300
· RUCKUS ICX 700 series switches running FastIron 8.0.80 and above supported; FastIron 80.0.90a required for Zero-Touch Provisioning |
| Device Type Support |
· Wi-Fi APs, Switches |
| Controller Expansion |
· Up to 4 controllers in N+1 active-active mode, supporting non-disruptive capacity expansion |
| Controller Redundancy |
· 3+1 distributed data preserving with N+1 redundancy within a cluster |
| Data Offload |
· Local offload of traffic directly to the Internet |
| AP |
· WPA, WPA2-AES, 802.11i, 802.1x/EAP, PSK, WISPr, WEP, WPA3, Enhanced Open, MAC Address
· Fast EAP-SIM re-authentication
· EAP-SIM, EAP-AKA, EAP-AKA over WLAN for 802.1x
· Wi-Fi Locations with the SZ AAA-Proxy functionality enabled |
| User Database |
· Internal database up to 25,000 users
· External: RADIUS, LDAP, Active Directory |
| Access Control |
· L2 (MAC address-based) L3/4 (IP and Protocol based)
· L2 client isolation
· Management interface access control
· Time-based WLANs
· Device type access policies
· Two-factor authentication password, SMS |
| Wireless Intrusion Detection (WIDS/WIPS) |
· Rogue AP detection / prevention
· Evil-twin/AP spoofing detection
· Ad hoc detection |
| AAA |
· RADIUS (primary and backup) |
| Hotspot |
· WISPr, Wi-Fi CERTIFIED, Passpoint™, HotSpot 2.0* |
| Guest Access |
· Supported |
| Captive Portal |
· Supported |
| Mesh |
· Self-healing, Self-forming, Zero-touch provisioning |
| Media |
· 802.11e/WMM, U-APSD, Wi-Fi Calling Prioritization* |
| mDNS Bonjour Fencing |
· Supported |
| WISPr |
· WISPr authentication, SZ downlink AP Survivability* |
| Software Queues |
· Per traffic type (4), per client |
| SmartCast Traffic Classification |
· Automatic, heuristics and TOS based or VLAN-defined |
| Rate Limiting |
· Supported |
| WLAN Prioritization |
· Supported |
| Client Load Balancing |
· Automatic |
| Band Load Balancing |
· Supported |
| AP Provisioning |
· L3 or L2 auto-discovery
· Auto-software upgrade
· Automatic channel optimization |
| Configuration Management |
· Secure multi-operator login (RBAC)
· Large scale (bulk) AP management tools
· Switch software and firmware upgrades
· Switch configuration management
· Per zone firmware versioning control
· Configuration audit trails
· Alarm and event notification (SNMP V1 / V2 / V3)
· Event Logging (Syslog)
· Integrated on-board remote accessible EMS functionality
· RESTful APIs (JSON)
· Web-UI
· CLI |
| Physical Characteristics |
| Power |
· (FRU Option) AC hot-swappable power supply
· AC power consumption: 135W
· Power Rating: 100-127VAC/200-240VAC, 47-63HZ |
| Dimensions |
· 1RU rack mountable: 435 mm (W) x 522 mm (D) x 44 mm (H); 17.13 in (W) x 20.55 in (D) x 1.73 in (H) |
| Weight |
· 6.97 kg, 15.37 lb |
| Connections |
· 4 - 1GbE ports
· 4 - 10GbE ports |
| LED |
· Front panel LEDs, one rear LED |
| Fans |
· Three (Field-Swappable fans FRU 902-S120-0000) |
| Mean-Time-Between-Failure (MTBF) |
· At 25C: 167,007 hours
· With 2x fans and 1x AC power supply unit |
| Environmental Conditions |
· Operating Temperature: 0°C (32°F) – 40°C (104°F)
· Operating Humidity: 5% to 95%, noncondensing
· Humidity storage: 95%, non-condensing |