Bộ chuyển mạch công nghiệp L3 Planet TSN-6325-8T4S4X 8x1G RJ-45, 4x2.5G SFP, 4x10G SFP+
Planet TSN-6325-8T4S4X là một bộ chuyển mạch Ethernet quản lý Layer 3 công nghiệp tiên tiến, được thiết kế với công nghệ Time-Sensitive Networking (TSN) của Planet. Thiết bị này tích hợp 8 cổng RJ45 10/100/1000BASE-T, 4 cổng SFP 1G/2.5GBASE-X và 4 cổng SFP+ 10GBASE-X, cùng với khả năng định tuyến IP Layer 3, tất cả được đặt trong vỏ kim loại IP30 chắc chắn, đảm bảo hoạt động ổn định trong các môi trường khắc nghiệt. Với băng thông chuyển mạch không chặn lên đến 116Gbps và khả năng hoạt động ở nhiệt độ từ -40 đến 75 độ C, TSN-6325-8T4S4X là giải pháp lý tưởng cho mạng tự động hóa công nghiệp, từ tầng fieldbus đến xương sống nhà máy, đảm bảo truyền dữ liệu ưu tiên cao với độ trễ cực thấp.
Thông số kỹ thuật
Model | TSN-6325-8T4S4X |
Hardware Specifications | |
Copper Ports | • 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP Port | • 4 1000/2500BASE-X SFP portsslot interfaces (Ports -9 to and Port-12) • Compatible with 1000BASE-X and 2500BASE-X SFP transceiver |
SFP+ Ports | • 4 10GBASE-SR/LR SFP+ slots • Backward compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP transceivers |
Console | • 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
Reset Button | • < 5 sec: System reboot • > 5 sec: Factory default |
Connector | • Removable 6-pin terminal block for power input • Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 • Removable 6-pin terminal block for DI/DO interface • Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND |
Alarm | • One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
Digital Input (DI) | • 2 digital input: Level 0: -24~2.1V (±0.1V) Level 1: 2.1~24V (±0.1V) Input load to 24V DC, 10mA max. |
Digital Output (DO) | • 2 digital output: Open collector to 24VDC, 100mA |
Enclosure | • IP30 aluminum case |
Installation | • DIN-rail or wall mounting |
SDRAM | • 2048Mbytes |
Flash Memory | • 64Mbytes |
Dimensions (W x D x H) | • 86 x 135 x 152 mm |
Weight | • 1,597g |
Power Requirements | • DC 9~48V, 5A max. • AC 24V, 2A max. |
Power Consumption | • DC input: Max. 16.8 watts/57.3BTU (system on) Max. 38.2 watts/130.3BTU (Full loading) • AC 24V input: Max. 21.7 watts/74BTU (system on) Max. 30 watts/102.3BTU (Full loading) |
ESD Protection | • 5KV DC |
Surge Protection | • 6KV DC |
LED Indicators | • System: Power 1 (Green), Power 2 (Green) Fault Alarm (Red) Ring (Green), Ring Owner (Green) DIDO (Red) • Per 10/100/1000T RJ45 Port: 1000Mbps LNK/ACT (Green) 10/100Mbps LNK/ACT (Amber) • Per SFP Port: 1G/2.5Gbps LNK/ACT (Green) • Per SFP+ Port: 1G/2.5Gbps LNK/ACT (Green) 10Gbps LNK/ACT (Amber) |
Switching Specifications | |
Switch Architecture | • Store-and-Forward |
Switch Fabric | • 116Gbps/non-blocking |
Throughput | • 86.3Mpps@64Bytes |
Address Table | • 32K entries, automatic source address learning and aging |
Shared Data Buffer | • 32Mbits |
Jumbo Frame | • 10K bytes |
Flow Control | • IEEE 802.3x pause frame for full duplex • Back pressure for half duplex |
Layer 3 Functions | |
IP Interfaces | • Max. 128 VLAN interfaces |
Routing Table | • Max. 512 static route entries • Max. 3072 routing table entries |
Routing Protocols | • IPv4 RIPv2 • IPv4 OSPFv2 • IPv6 OSPFv3 • IPv4 hardware static routing • IPv6 hardware static routing |
Layer 2 Functions | |
Port Configuration | • Port disable/enable • Auto-negotiation 10/100/1000Mbps full and half duplex mode selection • Flow control disable/enable • Port link capability control |
Port Status | • Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
Port Mirroring | • TX/RX/Both • Many-to-1 monitor • Mirror – Remote Switched Port Analyzer (Cisco RSPAN) • Supports up to 5 sessions |
VLAN | • IEEE 802.1Q tagged VLAN • IEEE 802.1ad Q-in-Q tunneling • Private VLAN Edge (PVE) • MAC-based VLAN • Protocol-based VLAN • Voice VLAN • IP Subnet-based VLAN • MVR (Multicast VLAN registration) • GVRP • Up to 4K VLAN groups, out of 4095 VLAN IDs |
Link Aggregation | • IEEE 802.3ad LACP/static trunk • 8 trunk groups with 16 ports per trunk group |
Spanning Tree Protocol | • IEEE 802.1D Spanning Tree Protocol • IEEE 802.1w Rapid Spanning Tree Protocol • IEEE 802.1s Multiple Spanning Tree Protocol • Supports 7 MSTP instances • BPDU Guard, BPDU filtering and BPDU transparent • Root Guard |
IGMP Snooping | • IPv4 IGMP (v1/v2/v3) snooping • IPv4 IGMP querier mode support • Supports 255 IGMP groups |
MLD Snooping | • IPv6 MLD (v1/v2) snooping, • IPv6 MLD querier mode support • Supports 255 MLD groups |
Bandwidth Control | • Per port bandwidth control • Ingress: 10Kbps~13128Mbps • Egress: 10Kbps~13128Mbps |
Ring | • Supports ERPS, and complies with ITU-T G.8032 • Recovery time < 10ms @ 3 nodes • Recovery time <50ms @ 16 nodes • Supports Major ring and sub-ring |
Synchronization | • IEEE 1588v2 PTP(Precision Time Protocol) PTP Master PTP Slave Boundary clock Peer-to-peer transparent clock End-to-end transparent clock |
QoS | • Traffic classification based, strict priority and WRR • 8-level priority for switching: Port number 802.1p priority 802.1Q VLAN tag DSCP/ToS field in IP packet |
Time-Sensitive Networking Protocols | • High Precision Time Synchronization IEEE1588 (Time Stamping) 802.1AS-Rev gPTP default profile • Shapers 802.1Qbv (Time-aware Scheduling) 802.1Qch (Cyclic Queuing and Forwarding) • TSN Stream Policing 802.1Qci (Per Stream Filtering and Policing) • Redundancy 802.1CB ( Frame Replication and Elimination for Redundancy for seamless redundancy) Also standard Linear and Ring protection • Delay Reduction EEE 802.1Qbu Frame Preemption IEEE 802.3br Interspersing Express Traffic (IET) |
Security Functions | |
Access Control List | • IP-based ACL/MAC-based ACL • ACL based on: MAC Address IP Address Ethertype Protocol Type VLAN ID DSCP 802.1p Priority • Up to 512 entries |
Security | • Port security • IP source guard, up to 512 entries • Dynamic ARP inspection, up to 1K entries • Command line authority control based on user level • Static MAC address, up to 64 entries |
AAA | • RADIUS client • TACACS+ client |
Network Access Control | • IEEE 802.1x port-based network access control • MAC-based authentication • Local/RADIUS authentication |
Management | |
Basic Management Interfaces | • Console; Telnet; Web browser; SNMP v1, v2c |
Secure Management Interfaces | • SSHv2, TLSv1.2, SNMPv3 |
System Management | • Firmware upgrade by HTTP protocol through Ethernet network • Configuration upload/download through HTTP • Remote Syslog • System log • LLDP protocol • NTP • PLANET Smart Discovery Utility • PLANET CloudViewer app |
SNMP MIBs | • RFC 1213 MIB-II • RFC 1493 Bridge MIB • RFC 1643 Ethernet MIB • RFC 2863 Interface MIB • RFC 2665 Ether-Like MIB • RFC 2819 RMON MIB (Group 1, 2, 3 and 9) • RFC 2737 Entity MIB • RFC 2618 RADIUS Client MIB • RFC 2863 IF-MIB • RFC 2933 IGMP-STD-MIB • RFC 3411 SNMP-Frameworks-MIB • RFC 4292 IP Forward MIB • RFC 4293 IP MIB • RFC 4836 MAU-MIB • IEEE 802.1X PAE • LLDP |
Environment | |
Operating | • -40 ~ 75 degrees C |
Storage | • -40 ~ 85 degrees C |
Humidity | • 5 ~ 95% (non-condensing) |
Bộ chuyển mạch công nghiệp L3 Planet IGS-6325-8T8S4X...
Liên hệ để có giá tốt