Danh mục

Volktek Woodpecker 9015-8GT2GS - Managed 8 x10/100/1000 RJ45 & 2 x FX/GbE SFP Industrial Switch ● 8 x GbE RJ45, 2 x FX/GbE SFP, DIP Switch ● Modbus TCP industrial protocol ● Xpress Ring, STP, RSTP for recovery in milliseconds ● IP 30 Metal casing.

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị chuyển mạch Công nghiệp Volktek Woodpecker 9015-8GT2GS

Model	Woodpecker 9015-8GT2GS
Standards	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-SX/LX IEEE 802.3x Flow Control IEEE 802.3ad Link Aggregation IEEE 802.1AB LLDP IEEE 802.1D STP IEEE 802.1w RSTP IEEE 802.1s MSTP IEEE 1588v2 PTP IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.1X Port Authentication IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE802.1ad QinQ
Interface
Ports	8 x 10/100/1000BASE-T RJ45 Ports 2 x 100FX/Gigabit SFP
DIP Switch	Primary, Redundant and Drop Alarm Setting
LED Panel	PWR, RPS, ALM, POST, 1000, LNK/ACT
Features
Performance	Jumbo frame Size: 10KBytes MAC Table Entries: 8K Switch Fabric: 20Gbps L2 Forwarding Rate: 14.8Mpps
Management	CLI, Telnet, SSH, HTTP, HTTPs, SNMP v1/v2c, SNMP v3, SNMP Trap, Management VLAN (MVLAN), Firmware upgradable, Configuration Backup/Restore, Syslog, SNTP, LLDP, DHCP Client/Relay/Option82, Port Mirroring, Server (service) control, Port Utilization, Alarm Information, ModbusTCP, Power Down trap, Topology Map,Port Configuration(enable/disable, speed/duplex), ONVIF, Port Statistic, System reboot from remote side, User Account with authority
Reliability	STP/RSTP/MSTP, ERPS v1/v2, Dual Homing, LACP, Static Trunk, Code Redundancy
VLAN	IEEE 802.1Q, Port-based VLAN, MAC-based VLAN, Management VLAN, QinQ
Traffic Control	802.1p QoS, Flow Control, Traffic Monitor (Abnormal Traffic Detection), Storm Control, Port Isolation, Loop Detection, Storm alarm threshold per port
Security	ACL, SSH, HTTPs, SNMPv3, Port-based 802.1x, Port Security, MAC Search, Refusal MAC, Sticky MAC, Static MAC, DHCP Snooping, DHCP Sever Screening, BPDU Guard/Filter, Root Guard, Managed Host, IP Source Guard
Power
Input Voltage	Primary inputs：24~48V DC Redundant inputs：24~48V DC
Power Consumption	System : Max. 11W, 24V DC@0.4A
Alarm Relay	One relay output with current carrying capacity of 1A@ 24V DC
Mechanical and Environment
Housing	Metal (IP30 Protection)
Mounting	DIN-Rail
Operating Temperature	-40°C~75°C (-40°F~167°F)
Storage Temperature	-40°C~85°C (-40°F~185°F)
Operating Humidity	5 to 95% RH (non-condensing)
Storage Humidity	5 to 95% RH (non-condensing)
Weight	550 g (1.2 lb)
Dimension (WxHxD)	50 x 116 x 100 mm (1.97 x 4.6 x 4 in)

Resistant to Extreme Environments
Engineered to withstand electromagnetic interference, electrostatic discharge, power surge, over-voltage, over-current, and reverse polarity.

Firmware Backup
Built with dual flash memory, the firmware will be protected in both memories to safeguard the settings and parameters of the network.

Secure Remote Management Control
SNMP v1/v2/v3 protocols provide enhanced packet transmission security to protect you from evil attacks and manage the switch remotely, which in the case of a change will notify you through an e-mail, thanks to SNMP trap feature. It stores log information and provides fast troubleshooting. SNMP (Simple Network Management Protocol) and SFP DDMI (Digital Diagnostics Monitoring Interface) for network traffic management and monitoring of switch functions.

Redundant Power Supply
To guarantee power runs continuously the switch is designed to be simultaneously connected to two power supplies and an alarm through a standard industrial terminal block. If one power supply stops working the switch will start feeding its power on the alternative power supply and the alarm will go off to notify technicians about the event.

Traffic Priority (Quality of Service)
Allocate hight bandwidth to mission-critical applications and send only specific traffic to them to prevent unpredictable errors caused by an overload of data.

Redundant Ring for Fast Recovery
Protocols like Xpress Ring, ERPS (Ethernet Ring Protection Switching), Dual Homing, LACP (Link Aggregation Control Protocol), and RSTP (Rapid Spanning Tree Protocol) assure continuous communication and recovery time of milliseconds in different network topology scenarios.