Danh mục

Model	EWS2910FP-FIT
Technical Specifications
Network Ports	8 10/100/1000 Mbps Ports 2 10/100/1000 Mbps SFP Ports
PoE Capable Ports	1-8 (802.3af/at) All Gigabit Ethernet ports can output up to 30 Watts
Total PoE Budget	110W
SDRAM	256MB
Flash Memory	32MB
Power Source	100 ~ 240VAC, 50-60Hz
Software Features
Multiple IP Interface	20 IPv6 address
ARP Table	Max. 192 ARP entries
Static ARP	Static 192 ARP entries
IPv4 Static Route	Max. 63 entries
IPv6 Static Route	Max. 21 entries
Software Features (L2 Features)
MAC Address Table	8K
Jumbo Frame	9K
Multicast Group	Max 256 groups
Port Security	Max. 256 Entries
SSL Certificate	Certificate/Key Update
L2 Features	802.1d Spanning tree Loopback Detection Multicast Filtering IGMP Multicast Forwarding IGMP Snooping MLD Multicast Forwarding 802.1Q VLAN tagging 802.3x flow control 802.3ad Link Aggregation 802.1d Spanning tree - RSTP - CIST - MSTP MAC Address Check-up ARP Inspection ARP Packet Validation (additional validation checks) Voice VLAN Port-based VLAN Protocol-Based VLAN CoS Mapping 802. 1X Radius Authentication Pv4 Settings IPv6 Settings IEEE 802. 3az Energy Efficeient Ethernet (EEE) Command Line Interface (CLI) SSH Server Telnet Server TFTP Client Configuration Upgrade/ Backup Simple Network Time Protocol (SNTP) SYSLOG 802.1d Spanning tree
L3 Features	IGMP Snooping MLD Snooping DHCP Snooping DHCP Relay Static Route
Port Settings	Multicast Filtering EEE Port Isolation Port Mirror Jumbo Frames LLDP
Security	802.1X Radius Authentication Protocol Port Security Radius Server DoS Prevention Web Access - HTTP Service - HTTPs Service Command Line Interface (CLI) Access - Telnet Service - SSH Service
System Settings	IP Settings - IPv4 Management - IPv6 Management - IPv4 Network ARP Table ARP Statistics Simple Network Time Protocol (SNTP)
Analyze	Local Logging Remote Logging
Diagnostic	Cable Diagnostics Ping Test IPv6 Ping Test Trace Route Connection Diagnostic
Access Control List (ACL)	MAC Based ACL MAC ACE IPv4 ACL IPv4 ACE IPv6 ACL IPv6 ACE ACL (Port) Binding
SNMP	SNMP v1/v2c/v3 Support
RMON	RMON 1,2,3,9
QoS	CoS Mapping DSCP Mapping Port CoS Bandwidth Control Storm control Advanced Mode Class Mapping
MIB/RFC Standards	RFC1213 RFC1493 RFC1757 RFC2674 RFC2863
Environmental & Physical
Temperature Range	Operating: 32°F to 104°F (0°C to 40°C)
Humidity (Non-Condensing)	5% - 95%
Package Contents	1x Fit Managed 8 Ports Gigabit Switch 1x Power Adapter Product Card Wall mount kit
Dimensions & Weights
EWS2910FP-FIT Device	Weight: 1.36 lbs. (620 g) Length: 9.44” (240 mm) Width: 4.13” (105 mm) Height: 1.06” (27 mm)
Warranty	1 years
Certifications	CE, FCC, IC

Data sheet EnGenius EWS2910FP-FIT

EWS2910FP-FIT - EnGenius Fit 110W Gigabit PoE+ 8 Port Switch
Layer 2 plus switch comes with 2 SFP uplink ports and multiple management options

8 10/100/1000 Base-T GbE ports
Full-featured layer 2 plus switching
802.3at PoE ready on all ports with 110W PoE budget
20 Gbps switching capacity
Setup in minutes with app-based step by step instructions
Quick-scan device register, remote monitoring, and troubleshooting
Real-time system metrics, analytics, and remote configurations
Hybrid switch supports multiple management options
From anywhere cloud visibility and control
Monitor a site or multiple sites with no recurring cost or licensing fee
Security - access control list/port security; 802.1x authentication
IGMP & MLD snooping provides advanced multicast filtering & network efficiency
802.3ad Link Aggregation (LACP), Spanning Tree (STP), Rapid Spanning Tree (RSTP) & Multiple Spanning Tree (MSTP)
Voice VLAN for fast, reliable deployment of VoIP services
Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) & prioritization
Standards-based technology ensures interoperability with existing standards-based network devices
Dual firmware images improve reliability & network uptime