Router Trendnet TI-WP100

Trendnet TI-WP100 Industrial AC1200 Wireless Gigabit PoE+ Router : ● 4 x Gigabit PoE+ ports, 1 x Gigabit WAN port ● PoE power budget: 120W@48V DC input, 120W@24V DC input ● PoE alive check restarts unresponsive PoE powered devices ● PoE power scheduling, power limit, and port priority ● Hardened IP30 rated metal housing ● Operating temperature range of -30° – 70° C ● Up to 8 SSIDs per band ● SSID to VLAN mapping ● Wireless WAN support (WAN load balancing/failover between wired Ethernet WAN and Wireless WAN) ● 802.1Q/Port-based VLAN support ● Inter-VLAN routing ● IPsec & SSL VPN (OpenVPN) support ● Redundant power inputs with overload current protection ● Digital input/output ● Modbus serial port and virtual COM support

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Thiết bị định tuyến Router Trendnet TI-WP100

Model	TI-WP100
Standards	IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.1Q IEEE 802.1X IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n (up to 300Mbps @ 256QAM)* IEEE 802.11ac (5GHz: up to 867Mbps @ 256QAM)* IEEE 802.3af IEEE 802.3at
Device Interface	4 x Gigabit PoE+ ports 1 x Gigabit WAN port 2 x Wireless WAN uplink (2.4GHz or 5GHz)* 1 x USB 2.0 (Log Storage) 4 x RP-SMA antenna connectors (2 x 2.4GHz/5GHz WLAN, 2 x 5GHz) 8-pin removable terminal block (primary/RPS power inputs & digital input/output) 4-pin removable terminal block RS-232/RS-485 serial port (Modbus) LED indicators Reset button
Performance	NAT (LAN-to-WAN) throughput: 900Mbps Routing performance: 900Mbps Maximum concurrent sessions: 32,000 Maximum number of VLANs: 4 (ID: 1-4091) IPsec VPN (AES-256/SHA-256/LAN-to-LAN) throughput: 160Mbps SSL VPN (OpenVPN®) Throughput (Blowfish/SHA-1/Server): 20Mbps
VPN	SSL VPN Tunnels: Up to 2 IPsec VPN Tunnels: Up to 16 tunnels SSL OpenVPN Modes: Server, Client SSL OpenVPN Encryption: Blowfish, AES-128/192/256 SSL OpenVPN Authorization: TLS with RSA, Static Key SSL OpenVPN Hash Algorithm: MD4, MD5, SHA-1/256/512 IPsec VPN Modes: Site-to-Site, Client-to-Site or Dynamic VPN IPsec Encryption: DES, 3DES, AES-128/192/256 IPsec Hash Algorithm: MD5, SHA-1/256 IPsec Key Exchange: IKEv1/2, Main/Aggressive Mode, Pre-shared key, X.509, DH Groups 1/2/5/14-18 IPsec Protocols: ESP/AH, PFS DH Groups 1/2/5/14-18, X-AUTH, DPD, Local/Remote ID: FQDN, User@FQDN, Key ID IPsec NAT Traversal
Networking	WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled) NAT Loopback Enable/Disable NAT Modes: NAT, PAT, One-to-One NAT VLAN tag assignment on WAN interface IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6), Link-Local, PPPoE VLAN ID assignment on WAN interface IGMP proxy on WAN interface WAN IP address alias Routing: Static (Up to 64 entries), RIPv1/v2, OSPFv2, BGP4 Static ARP (Up to 32 entries) VLAN: Port-based, 802.1Q (Up to 4 VLANs, 4 IP interfaces) Inter-VLAN Routing SSID per VLAN assignment DHCP Server, Relay, Options 42/66/72/114/150/160 Dynamic DNS: dyn.com, no-ip.com WAN Failover Networking monitoring for WAN load balancing (DNS query or ICMP, latency threshold, fail threshold, query threshold) WAN Traffic load balancing: Smart Weight (Automatic), Specific Weight Percentage, User defined traffic policy VPN passthrough: IPsec, PPTP, L2TP Up to 8 SSIDs per band AP Router, WDS only, and WDS hybrid modes WiFi scheduling 5G WiFi bandsteering
Access Control	Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-RADIUS Wireless IDS Certificate management (Root CA, SCEP, Local certificate, self-signed, RSA, Import PEM certificates) NAT/SPI, virtual server/port forwarding, port triggering, firewall traffic rules, DMZ host, allow/deny ping on WAN interfaces ALG: PPTP/L2TP/IPsec VPN passthrough MAC filtering Custom scheduling for access control rules MMI (max. password attempts, login timeout, HTTP/HTTPS, HTTPS certificate, HTTP compares/binding) Wireless client isolation Stealth Mode DoS prevention
Quality of Service	Software-based priority queues Hardware-based bandwidth control WMM
Management	HTTP/HTTPS web-based GUI CLI: Telnet / SSHv2 Command script TR-069/STUN SNMP v1, v2c, v3 SNMP trap (up to 4 receivers) Modbus Slave, gateway for TCP, and RTU/ASCII master/slave access Virtual COM RFC2217, TCP client, TCP server, UDP Data logging (sniffer, offline proxy, full-time proxy) Device configuration backup & restore, upgrade firmware, reboot, and reset to default Scheduled auto reboot Auto restore configuration Set custom UI logo Set custom CSS Wake-on-LAN (WoL) Diagnostic tools: Built-in ping, traceroute, speed test, and packet capture utilities Event configuration and management: digital input/output, Modbus, syslog, SNMP trap, email alert, reboot System time settings (NTP, manually set, or copy from PC, time zone, and daylight savings time) FTP/FTPS/SFTP server Creates groups (IP, MAC, or host name), external server object definition
MIB	MIB II RFC 1213
Frequency	2.412 - 2.462GHz 5.150 – 5.250GHz, 5.725 – 5.850GHz
Modulation	802.11b: CCK, DQPSK, DBPSK 802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM with OFDM 802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM
Media Access Protocol	CSMA/CA with ACK
Antenna Gain	4 x 2.4GHz 2.5dBi / 5GHz: 3.5 dBi dual-band detachable/external
Wireless Output Power (max output power without antenna gain)	802.11a: FCC: 21 dBm (max.) / ETSI: 17.38 dBm (max.) 802.11b: FCC: 26 dBm (max.) / ETSI: 17.38 dBm (max.) 802.11g: FCC: 23 dBm (max.) / ETSI: 17.38 dBm (max.) 802.11n (2.4GHz): FCC: 21 dBm (max.) / ETSI: 14.38 dBm (max.) 802.11n (5GHz): FCC: 21 dBm (max.) / ETSI: 16.4 dBm (max.) 802.11ac: FCC: 21 dBm (max.) / ETSI: 16.4 dBm (max.)
Receiving Sensitivity	802.11a: -68 dBm (typical) @ 54Mbps 802.11b: -83 dBm (typical) @ 11Mbps 802.11g: -70 dBm (typical) @ 54Mbps 802.11n (2.4GHz): -66 dBm (typical) @ 300Mbps 802.11n (5GHz): -64 dBm (typical) @ 300Mbps 802.11ac: -55 dBm (typical) @ 867Mbps
Wireless Channels	2.4GHz: FCC: 1 – 11, ETSI: 1 – 13 5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165; ETSI: 36, 40, 44, 48
Power	PWR (Primary) terminal input: 24 – 56V DC RPS (Redundant) terminal input: 24 – 56V DC Digital Input: Logic 0: 0V-2V, Logic 1: 5V-30V Digital Output: Relay Mode, up to 30V/1A Compatible power supply: TI-S12048 (120W), TI-S12024 (120W), TI-S24048 (240W) sold separately Max. Consumption: 20W (no PoE load), 140W (full PoE load)
PoE	PoE budget: 120W@48V DC input, 120W@24V DC input 802.3at: Up to 30W per port PoE Mode A: Pins 1, 2, 3, and 6 for power PoE auto classification PoE port priority/power limit/power scheduling/PD alive check Over current/short circuit protection
Terminal Block	Redundant power inputs, alarm relay contact, 8 pin Wire range: < 2.5 mm^2 Solid wire (AWG): 12-24 Stranded wire (AWG): 12-24 Wire strip length: 5mm
Enclosure	IP30 rated metal enclosure Fanless passive cooling DIN-Rail mount Grounding point ESD (Ethernet) Protection: 8KV DC Surge (Power) Protection: 2KV DC
MTBF	333,367 hours @ 25° C 222,166 hours @ 70° C
Operating Temperature	-30° – 70° C (-22° – 158° F)*
Operating Humidity	Max. 95% non-condensing
Dimensions	160 x 120 x 51mm (6.3 x 4.72 x 2.01 in.)
Weight	1.09kg (2.4 lbs.)
Certifications	CE FCC Freefall (IEC 60068-2-32)