Aruba AP-505 (R2H28A) Wi-Fi 6 802.11ax Internal Antennas...

Hỗ trợ trực tuyến

Tư vấn

Hỗ trợ Tư Vấn

0909648899

Kinh doanh

Kinh Doanh 01

0917684899

Kinh Doanh 02

0917993131

Kinh Doanh 03

0915793030

Kinh Doanh 04

0906641689

Kỹ thuật

Hỗ trợ Kỹ Thuật 1

02862578356

Hỗ trợ Kỹ Thuật 2

02862578355

Mô tả sản phẩm

Thiết bị phát sóng Wifi Aruba AP-505 (R2H28A)

Model	AP-505 (R2H28A)
Wi-Fi radio specifications	AP type : Indoor, dual radio, 5GHz and 2.4GHz 802.11ax 2x2 MIMO 5GHz radio : Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices 2.4GHz radio : Two spatial stream Single User (SU) MIMO for up to 574Mbps (287 Mbps) wireless data rate with 2SS HE40 (HE20) 802.11ax client devices Up to 256 associated client devices per radio 16 BSSIDs per radio
Wi-Fi Antennas	Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.9dBi in 2.4GHz and 5.7dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees
Other Interfaces	E0: Ethernet wired network port (RJ-45) Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX POE-PD: 48Vdc (nominal) 802.3af/at POE (class 3 or 4) 802.3az Energy Efficient Ethernet (EEE) DC power interface 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length USB 2.0 host interface (Type A connector) Capable of sourcing up to 1A / 5W to an attached device Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio BLE: up to 7dBm transmit power (class 1) and -93dBm receive sensitivity (1Mbps) Zigbee: up to 6dBm transmit power and -96dBm receive sensitivity Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.3dBi Visual indictors (two multi-color LEDs): For System and Radio status Reset button: Factory reset, LED mode control (normal/off) Serial console interface Proprietary, micro-B USB physical jack Security slot Kensington security slot
Power Sources And Power Consumption	Power Sources: The AP supports direct DC power and Power over Ethernet The AP supports direct DC power and Power over Ethernet When both DC and POE power sources are available, DC power takes priority over POE Power sources are sold separately; see the 500 Series Ordering Guide for details When powered by DC or 802.3at (class 4) POE, the AP will operate without restrictions. When powered by 802.3af (class 3) POE and with the IPM feature disabled, the AP will disable the USB port. In the same configuration but with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions and order can be programmed Maximum (worst-case) power consumption (without / with a USB device attached): DC powered: 8.9W / 14.2W. POE powered (802.3at): 11.0W / 16.5W. POE powered (802.3af): 11.0W / 13.5W. This assumes that up to 5W is supplied to the attached USB device. Maximum (worst-case) power consumption in idle mode: 4.3W (DC) or 6.2W (POE). Maximum (worst-case) power consumption in deep-sleep mode: 1.7W (DC) or 3.7W (POE).
Mechanical Specifications	Dimensions/weight (AP-505; unit, excluding mount bracket): 160mm (W) x 161mm (D) x 37mm (H) 500g Dimensions/weight (AP-505; shipping): 193mm (W) x 183mm (D) x 63mm (H) 645g
Environmental Specifications	Operating conditions Temperature: 0C to +50C / +32F to +122F Humidity: 5% to 93% non-condensing AP is plenum rated for use in air-handling spaces ETS 300 019 class 3.2 environments Storage and transportation conditions Temperature: -40C to +70C / -40F to +158F Humidity: 5% to 93% non-condensing ETS 300 019 classes 1.2 and 2.3 environments