Thiết bị không dây Indoor Wireless Access Point Fortinet FortiAP 23JF (FAP-23JF)
Mã sản phẩm | FAP-23JF |
Hardware | |
Hardware Type | Indoor walljack / Desktop AP |
Number of Radios | 3 + 1 BLE |
Number of Antennas | 4 single band WiFi + 1 dual band scanning + 1 single band 2.4 GHz BLE/ZigBee |
Antenna Type and Peak Gain | - PCB antenna - Dual band: 4.0 dBi in 2.4 GHz band and 4.0 dBi in 5 GHz band - BLE antenna: 3.5 dBi in 2.4 GHz band |
Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities | - Frequency band: 2.4 GHz - Channel width: 20/40MHz - Modulation: BPSK, QPSK, 64/256/1024 QAM - MIMO Chains: 2x2 Service |
Radio 2 Capabilities | - Frequency band: 5.0GHz - Channel width: 20/40/80MHz - Modulation: BPSK, QPSK, 64/256/1024 QAM - MIMO Chains: 2x2 Service |
Radio 3 Capabilities | - Frequency bands: 2.4 GHz and 5.0 GHz - MIMO Chains: 1x1 Frequency Scanning |
Maximum Data Rate | - Radio 1: up to 574 Mbps - Radio 2: up to 1200 Mbps - Radio 3: Frequency scanning only |
Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power |
Interfaces | - 7x 10/100/1000 Base-T RJ45Ports (1x 802.3at PoE (PD) - 1x 802.3af PoE (PSE) - 2x Non-PoE Ports - 1x Pass-through in, 1x Pass-through out, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) | - 1 x 802.3at PoE default - Operational modes: • Powered by 802.af PoE - Only Radio functionality • Powered by 802.3at - All radio+ PSE (7W) • Powered by DC power adaptor - All radio's + USB + PSE ( 802.3af) |
Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist |
Maximum Tx Powerr (Conducted) | - Radio 1: 2.4 GHz 25 dBm / 158 mW (2 chains combined) - Radio 2: 5GHz: 21 dBm / 158 mW (2 chains combined) - Radio 3: N/A |
Kensington Lock | ✔ |
IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz |
SSID Types Supported | Local-Bridge, Tunnel, and Mesh |
Per Radio Client Capacity | Up to 512 clients per radio (Radio1 and Radio2) |
Cellular Co-existence | ✔ |
LED Off Mode | ✔ |
Advanced 802.11 Features | |
OFDMA | ✔ (UL and DL) |
Spatial Reuse (BSS Coloring) | ✔ |
UL MU-MIMO | ✔ |
DL-MU-MIMO | ✔ |
Enhanced Target Wake Time (TWT) | ✔ |
ZeroWait DFS | ✔ |
Wireless Monitoring Capabilities | |
Rogue Scan radio modes | Background, Dedicated |
WIPS / WIDS radio modes | Background, Dedicated (recommended) |
Packet Sniffer Mode | ✔ |
Spectrum Analyzer | ✔ |
Dimensions | |
Length x Width x Height | 6.6 x 4.6 x 1.1 inches (168 x 117 x 28 mm) |
Weight | 1.54 lbs (0.7 kg) |
Mounting Options | Wall Plate, Optional Desk Mount FAP-MNT-WJ-20 |
Included Accessories | Standard Mount kit for Ceiling, T-Rail, and Wall |
Environment | |
Power Supply | - 802.3at PoE: GPI-130 - Optional DC power adaptor SP-FAP23J-PAX-10 |
PSE functionality | ✔ |
Power Consumption (Maximum) | 17.5W without PSE out and 31W with PSE out |
Humidity | 10–90% non-condensing |
Operating / Storage Temperature | 32–122°F (0 - 50°C) / -22–158°F (-30–70°C) |
Directives | Low Voltage Directive • RoHS |
Mean Time Between Failures | >10 Years |
Surge Protection Built In | ✔ |
SKU | Description |
FC-10-P23JF-247-02-DD | 24x7 FortiCare Contract |
GPI-130 | 802.3af PoE injector |
- FAP-23JF Indoor FortiAP - Wall Plate AP - Dual radio (802.11 b/g/n/ax 2x2 MU-MIMO and 802.11 a/n/ac/ax 2x2 MU-MIMO), internal antennas, 7 x 10/100/1000 RJ45 port (1x 802.3at PoE PD, 1x 802.3af PoE PSE, 2x Non-PoE Ports), BT / BLE, 1x RS-232 RJ45 Serial Port. Wall plate mounting kit included For power order: 802.3af PoE injector GPI-130.
- FC-10-P23JF-247-02-DD - 24x7 FortiCare Contract
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt