Model |
TPE-3018LS |
Device Interface |
- 16 x Gigabit PoE+ ports
- 2 x Shared Gigabit ports (RJ-45 or SFP (100/1000Mbps))
- LED indicators
- PoE power status LED display (total power budget, available power, consumption per port)
|
Data Transfer Rate |
- Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit Ethernet: 2000Mbps (full duplex)
|
Performance |
- Switch fabric: 36Gbps
- RAM buffer: 512KB
- MAC address table: 8K entries
- Jumbo Frames: 10KB
- Forwarding mode: store and forward
- Forwarding rate: 26.7Mpps (64-byte packet size)
|
Spanning Tree |
- STP (spanning tree)
- RSTP (rapid spanning tree)
- MSTP (multiple spanning tree)
|
Link Aggregation |
- Static link aggregation and dynamic LACP (Up to 8 groups)
|
Quality of Service (QoS) |
- 802.1p Class of Service (CoS)
- DSCP (Differentiated Services Code Point)
- Bandwidth limit per port
- Queue Scheduling: strict priority (SP), weighted round robin (WRR)
|
VLAN |
- Multiple management VLAN assignment
- 802.1Q Tagged VLAN
- MAC-based VLAN
- Surveillance VLAN
- Voice VLAN
- Up to 256 VLAN groups, ID Range 1-4094
|
Multicast |
- IGMP Snooping v2/v3
- IGMP immediate/fast leave
- IGMP querier
- Dynamic/static multicast MAC address table
- MVR (Multicast VLAN registration)
- Up to 1K multicast entries
|
Access Control |
- 802.1X port-based authentication (Local user database, RADIUS, Guest VLAN)
- DHCP Snooping / Option 82
- Loopback detection
- Denial of Service (DoS) prevention
- Storm control (broadcast, unknown multicast, unknown unicast, min: 16Kbps)
- Head-of-line (HoL) blocking prevention
- IP Source Guard / IP-MAC-Port-VLAN binding
- Protected ports
- Port Security/MAC address learning restriction
- Access Control List (ACL)
- MAC Address (VLAN ID, EtherType, 802.1p)
- IPv4 (IP Protocol, TCP/UDP Port, 802.1p, DSCP, TCP flag, ICMP type, ICMP code)
- Surveillance Mode (ONVIF)
- Surveillance mode GUI for simplified configuration and network monitoring
- Device discovery for ONVIF compliant devices such as IP cameras or NVRs
- Upload virtual maps
- Change IP camera IP address settings
- Upgrade IP camera firmware
- Change IP camera administrator user name and password
|
PoE |
- PoE budget: 220W
- 802.3at: up to 30W per port (ports 1-16)
- PoE Mode A: Pins 1,2 and pins 3,6 for power
- PoE power scheduling
- PD alive check
- Over current/short circuit protection
|
Power |
- Input: 100 – 240V AC, 50 – 60Hz, internal power supply
- Max. consumption: 14W (No PoE load)
|
Surge Protection |
|
Fan/Acoustics |
- Quantity: 1 (Hot swappable)
- Noise Level: 60.1 dBA (max.)
|
MTBF |
|
Operating Temperature |
|
Operating Humidity |
|
Dimensions |
- 440 x 195 x 44.45mm (17.3 x 9.8 x 1.74 in.)
- Rack mountable 1U height
|
Weight |
|