31 Đường số 9, KDC Cityland, P.10, Q.Gò Vấp, TP.HCM
028 62578355
HOTLINE
0909648899  
028 62578355
Trang chủ > Sản phẩm > Thiết bị mạng HPE > Wifi Aruba > Aruba AP-555 (JZ356A)

Aruba AP-555 (JZ356A)

JZ356A - Aruba AP-555 (RW) Dual Radio 8x8:8 / 4x4:4 802.11ax Internal Antennas Unified Campus AP.
  • Giá bán : Liên hệ để có giá tốt
  • Tình trạng : Còn hàng


Thiết bị phát sóng Wifi Aruba AP-555 (JZ356A)

Model AP-555 (JZ356A)
Wi-Fi radio specifications
  • AP type: Indoor, dual/tri-radio, 5GHz and 2.4GHz 802.11ax 4x4 MIMO
  • 5GHz radio (dual-radio operation): Eight spatial stream Single User (SU) MIMO for up to 4.8Gbps wireless data rate with individual 8SS HE80 (or 4SS HE160) 802.11ax client devices, or with eight 1SS or four 2SS HE80 802.11ax MU-MIMO capable client devices simultaneously
  • 5GHz radio (tri-radio operation): Four spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with individual 4SS HE80 (or 2SS HE160) 802.11ax client devices, or with four 1SS or two 2SS HE80 802.11ax MU-MIMO capable client devices simultaneously
  • 2.4GHz radio: Four spatial stream Single User (SU) MIMO for up to 1,147Mbps (574Mbps) wireless data rate with individual 4SS HE40 (HE20) 802.11ax client devices or with two 2SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously
  • Both downlink and uplink MU-MIMO in 5GHz, downlink only in 2.4GHz
  • Support for up to 1,024 associated client devices per radio, and up to 16 BSSIDs per radio
Wi-Fi antennas
  • Integrated downtilt omni-directional antennas for 4x4 MIMO in 2.4GHz with peak antenna gain of 4.3dBi, and 8x8 MIMO in 5GHz with peak antenna gain of 5.8dBi in 5GHz. In tri-radio mode, the peak gain of the antennas for each of the 4x4 5GHz radios is 5.5dBi (radio 0L, lower half of 5GHz) and 5.6dBi (radio 0U, upper half of 5GHz)
  • Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
Other interfaces
  • E0, E1: HPE SmartRate port (RJ-45, maximum negotiated speed 5Gbps)
    • Auto-sensing link speed (100/1000/2500/5000BASE-T) and MDI/MDX
    • 2.5Gbps and 5Gbps speeds comply with NBase-T and 802.3bz specifications
    • POE-PD: 48Vdc (nominal) 802.3at/bt POE (class 4 or higher)
    • 802.3az Energy Efficient Ethernet (EEE)
  • Link aggregation (LACP) support between both network ports for redundancy and increased capacity
  • POE power can be drawn from either port (single source, or set to prioritize) or both ports simultaneously (set to combine). When set to prioritize, the AP draws power from E0 and may failover to E1.
  • DC power interface: 48Vdc (nominal, +/- 5%), accepts 1.35mm/3.5mm center-positive circular plug with 9.5mm length
  • USB 2.0 host interface (Type A connector)
    • Capable of sourcing up to 1A / 5W to an attached device
  • Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio (2.4GHz)
    • BLE: up to 8dBm transmit power (class 1) and -99dBm receive sensitivity (125kbps)
    • Zigbee: up to 8dBm transmit power and -97dBm receive sensitivity
    • A pair of integrated omnidirectional antennas (polarization diversity) with roughly 30 degrees downtilt and peak gain of 4.5dBi
  • Visual indictors (two multi-color LEDs): for System and Radio status
  • Reset button: factory reset, LED mode control (normal/off)
  • Serial console interface (proprietary, micro-B USB physical jack)
  • Kensington security slot
Power sources and power consumption
  • The AP supports direct DC power and Power over Ethernet (POE; on port E0 and/or E1)
  • When POE power is supplied to both Ethernet ports, the AP can be configured to combine or prioritize power sources
  • When both DC and POE power sources are available, DC power takes priority over POE
  • Maximum (worst-case) power consumption (dual-radio operation):
    • DC powered: 32.6W
    • POE powered (802.3bt or dual 802.3at): 38.2W
    • POE powered (802.3at, IPM disabled): 25.1W
    • All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 6.0W (POE powered) or 5.4W (DC powered).
  • Maximum (worst-case) power consumption in idle mode (dual-radio operation): 15.0W (POE) or 15.1W (DC).
  • Maximum (worst-case) power consumption in deep-sleep mode: 3.8W(POE) or 3.6W (DC)
Mechanical specifications
  • Dimensions/weight (AP-555; unit, excluding mount bracket):
    • 260mm (W) x 260mm (D) x 58mm (H) / 10.2” (W) x 10.2” (D) x 2.3” (H)
    • 1,570g / 55.4oz
  • Dimensions/weight (AP-555; shipping):
    • 320mm (W) x 303mm (D) x 108mm (H) / 12.6” (W) x 11.9” (D) x 4.3” (H)
    • 2,230g / 78.7oz
Environmental specifications
  • Operating conditions
    • Temperature: 0C to +50C / +32F to +122F
    • Humidity: 5% to 93% non-condensing
    • AP is plenum rated for use in air-handling spaces
    • ETS 300 019 class 3.2 environments
  • Storage and transportation conditions
    • Temperature: -40C to +70C / -40F to +158F
    • Humidity: 5% to 93% non-condensing
    • ETS 300 019 classes 1.2 and 2.3 environments

JZ356A : Aruba AP-555 (RW) Dual Radio 8x8:8 / 4x4:4 802.11ax Internal Antennas Unified Campus AP.

Data sheet Aruba 550 Series Wireless Access Points

Sản phẩm liên quan

Aruba AP-514 (Q9H57A)
Q9H57A - Aruba AP-514 (RW) Dual Radio 4x4:4 + 2x2:2 802.11ax...

Liên hệ để có giá tốt

Aruba AP-515 (Q9H62A)
Q9H62A - Aruba AP-515 (RW) Dual Radio 4x4:4 + 2x2:2 802.11ax...

Liên hệ để có giá tốt

Aruba AP-534 (JZ331A)
JZ331A - Aruba AP-534 (RW) Dual Radio 4x4:4 802.11ax External...

Liên hệ để có giá tốt

Aruba AP-505 (R2H28A)
R2H28A - Aruba AP-505 (RW) Dual Radio 2x2:2 802.11ax Internal...

Liên hệ để có giá tốt

Aruba AP-535 (JZ336A)
JZ336A - Aruba AP-535 (RW) Dual Radio 4x4:4 802.11ax Internal...

Liên hệ để có giá tốt

Aruba AP-504 (R2H22A)
R2H22A - Aruba AP-504 (RW) Dual Radio 2x2:2 802.11ax External...

Liên hệ để có giá tốt

Hỗ trợ trực tuyến