| Model |
TEW-929DRU |
| Standards |
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3ab
- IEEE 802.3bz (2.5GBASE-T)
- IEEE 802.1Q
- IEEE 802.1X
- IEEE 802.11a
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n (up to 400Mbps @ 256QAM)*
- IEEE 802.11ac (up to 867Mbps @ 256QAM)*
- IEEE 802.11ax Wi-Fi 6 (5GHz: up to 1201Mbps, 2.4GHz: up to 574Mbps @ 1024QAM)*
|
| Device Interface |
- 1 x 2.5GbE LAN port (LAN1)
- 2 x Gigabit LAN ports (LAN2-LAN3)
- 2 x Gigabit WAN ports (WAN failover / load balancing)
- 1 x USB 2.0 (USB Storage Device Sharing)
- 1 x RJ-45 console port
- Security slot
- Grounding screw
- Power switch
- Reset button
- LED indicators
|
| Performance |
- NAT (LAN-to-WAN) throughput: 900Mbps
- Routing performance: 900Mbps
- Maximum concurrent sessions: 32,768
- Maximum number of VLANs: 8 (ID: 1-4094)
- IPsec VPN (AES-256/SHA-256/LAN-to-LAN) throughput: 64Mbps
- SSL VPN (OpenVPN®) Throughput (Blowfish/SHA-1/Bridge): 12Mbps
|
| Virtual Private Networking |
- SSL VPN Server Mode (OpenVPN®) (Up to 10 tunnels)
- SSL VPN Client Mode (OpenVPN®)
- SSL (OpenVPN®) Encryption: BF-CBC, AES-128-CBC, AES-256-CBC
- SSL (OpenVPN®) HMAC Authentication: SHA1, SHA256
- SSL VPN Certificate: RSA
- IPsec VPN Server (Dynamic) / Site-to-Site (Up to 15 tunnels)
- IPsec Encryption: DES, 3DES, AES-128/256
- IPsec Authentication: MD5, SHA1, SHA2-256, Certificate: X.509v3
- IPsec Key Exchange: IKE: IKEv1/2, Main Mode, RSA, Pre-shared Key, DH Groups 1/2/5/14
- IPsec Protocols: ESP (Transport/Tunnel), PFS (Per DH Groups 1/2/5/14, DPD (Dead Peer Detection), Local/Remote ID: IP Address, FQDN (Fully Qualified Domain Name)
- IPsec NAT Traversal
- IPsec VPN failover support
- PPTP/L2TP VPN Server (Up to 10 tunnels)
- L2TP with IPsec VPN Server (Up to 8 tunnels shared with L2TP)
- PPTP/L2TP Encryption: MPPE 40-bit, 128-bit, IPsec
- PPTP/L2TP Authentication: MS-CHAPv1/2
|
| Networking |
- WAN Modes: NAT, Classical Routing
- NAT Modes: NAT, PAT (Port Address Translation), One-to-One NAT
- WiFi client bridge mode
- ISP IPv4 WAN Modes: DHCP, Static IP, PPPoE, PPTP, L2TP
- IPv4 WAN client ID and vendor class for DHCP, override/clone MAC address
- ISP IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6), Link-Local, PPPoE
- IPv6 LAN Modes: SLAAC, Stateless/Stateful DHCPv6
- VLAN ID assignment on WAN interface
- Routing: Static, RIPv1/v2, OSPFv1/2, routing policies (Up to 20 entries)
- Static ARP entries (Up to 32 entries)
- Static host entries (Up to 32 entries)
- Inter-VLAN Routing (Up to 8 VLANs, 8 IP interfaces)
- SSID per VLAN assignment
- DHCP Server/Relay
- DHCP static leases/reservation
- Dynamic DNS: dynu.com, freedns.afraid.org, changeip.com, ydns.io, duckdns.org, no-ip.com
- WAN Failover
- WAN Load Balancing
|
| Access Control |
- Wireless encryption: WPA2/WPA3-Personal (PSK), WPA2/WPA3-Enterprise (EAP)
- Wireless captive portal (external RADIUS authentication, internal user authentication, redirect URL)
- NAT, virtual server/port forwarding, port triggering, firewall traffic rules, DMZ host, UPnP/NAT-PMP, allow/deny ping on WAN interfaces
- ALG: PPTP/L2TP/IPsec VPN passthrough, PPPoE Relay, FTP/TFTP/SNMP/SIP/RTSP/IRC/H.323 passthrough
- MAC & IP filtering
- Advanced Traffic/Firewall rules configuration
- Custom scheduling for access control rules
- Wireless guest network
- WPS (WiFi Protected Setup™) Virtual PBC (Push Button), PIN
- Wireless client isolation
- DoS prevention (TCP/UDP/ICMP Flood Prevention)
- Advanced web content filtering service powered by Bark®
- RADIUS Server
|
| Quality of Service |
- User defined classification rules with 4 priority queues
- WMM (Wireless Multimedia Extensions)
|
| Management/Monitoring |
- CLI (Console/Telnet/SSH) command line management
- HTTP/HTTPS web based management
- Security certificates: Create, Import/Export
- Scheduled automatic reboot
- Scheduled Wake-on-LAN (WoL) for remote WoL device
- View ARP and routing table entries
- View CPU load, traffic/wireless usage, NAT sessions, and Internet bandwidth usage
- Internet speed test
- Internal system logging
- Manual or online firmware upgrade and notification
- Backup and restore configuration
- Internal logging
- Ping watchdog
- DPI (nDPI deep packet inspection) monitoring
- Ping, traceroute, ns-lookup, Internet speed test, and multi-WAN diagnostic tools
|
| Frequency |
- 2.412 – 2.462GHz
- 5.180 – 5.250GHz, 5.745 – 5.825GHz
|
| Modulation |
- 802.11b: CCK, DQPSK, DBPSK
- 802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM
- 802.11n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM with OFDM
- 802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM
- 802.11ax: BPSK, QPSK, and 16/64/256/1024-QAM
|
| Media Access Protocol |
|
| Antenna Gain |
- 2 x dual band detachable/external antennas (2.4GHz: 3.2 dBi (max.) / 5GHz: 5.5 dBi)
|
Wireless Output Power
(max output power without antenna gain) |
- 802.11b/g/n/ac/ax (2.4GHz): FCC: 24 dBm (max.) / IC: 24 dBm (max.)
- 802.11a/n/ac/ax (5GHz): FCC: 23 dBm (max.) / IC: 23 dBm (max.)
|
| Receiving Sensitivity (per chain) |
- 802.11a: -70 dBm (typical) @ 54Mbps
- 802.11b: -80 dBm (typical) @ 11Mbps
- 802.11g: -69 dBm (typical) @ 54Mbps
- 802.11n (2.4GHz): -59 dBm (typical) @ 300Mbps
- 802.11n (5GHz): -56 dBm (typical) @ 300Mbps
- 802.11ac: -56 dBm (typical) @ 866Mbps
- 802.11ax (2.4GHz): -50 dBm (typical) @ 574Mbps
- 802.11ax (5GHz): -51 dBm (typical) @ 1201Mbps
|
| Wireless Channels |
- 2.4GHz: FCC: 1–11
- 5GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165
|
| Power |
- Input: 100 – 240 V AC, 50 – 60 Hz, 0.9A
- Output: 12V DC, 2A external power adapter
- Max. Consumption: 17.4W
|
| Operating Temperature |
- 0° – 40° C (32° – 104° F)
|
| Operating Humidity |
|
| Certifications |
|
| Dimensions |
- 280 x 160 x 44.45mm (11 x 6.3 x 1.75 in.)
- Rack mountable 1U height
|
| Weight |
|
