Thiết bị mạng Switch Trendnet TI-PG102F
Model |
TI-PG102F |
Device Interface |
- 8 x Gigabit PoE+ ports
- 2 x Gigabit SFP slots (1000Base-FX)
- 6-pin removable terminal block
- LED indicators
- Wall mount
- DIN-Rail mount
- Grounding point
|
Data Transfer Rate |
- Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
- Gigabit: 2000Mbps (full duplex)
- SFP: 2000Mbps (full duplex)
|
Performance |
- Data RAM Buffer: 0.25MB (Change unit of measure)
- Switching Fabric: 20Gbps
- MAC Address Table: 11K entries
- Jumbo Frame: 10KB
- Forwarding rate: 14.88Mpps (64-byte packet size)
|
Special Features |
- Hardened components rated for extreme temperatures
- Redundant power inputs
- Power DIN adapter (sold separately: model 48VDC3000)
- ESD 8kV support
- Low-profile design
|
DC Power |
- Input: 48 – 56V DC
- Recommended power supply: TI-S24048 (sold separately)
- Max. consumption: 4.8W (no PoE)
|
Optional Power DIN Adapter (48VDC3000 sold separately) |
- Input: 100 – 240V AC, 50/60Hz, 2A
- Output: 48V DC, 3.34A 160W max.
|
PoE |
|
Terminal Block |
- Redundant power inputs, alarm relay contact, 6-pin
- Wire range: 0.34mm^2 to 2.5mm^2
- Solid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5 lb. – in. / 0.5Nm / 0.56Nm
- Wire strip length: 7-8mm
|
Alarm Relay Contact |
- Relay outputs with current carrying capacity of 1A, 24V DC
- Open circuit mode when two power sources are connected
- Short circuit mode when only one power source is connected
|
MTBF |
|
Housing |
- IP30 metal case
- DIN-Rail mount
- Wall mount
- Grounding point
|
Operating Temperature |
- -40° – 75° C (-40° – 167° F)
|
Operating Humidity |
|
Dimensions |
- 150 x 145 x 23mm (5.9 x 5.7 x 1 in.)
|
Weight |
|