HOTLINE
0917684899 028 62578355
Router Huawei NetEngine AR502H-5G Industry-grade and high-performance edge computing :
Thiết bị định tuyến Router Huawei NetEngine AR502H-5G
| Model | NetEngine AR502H-5G |
| Hardware parameters | |
| Case | • Die-casting |
| Processor | • ARM quad-core A53, 1 GHz |
| DDR | • 2 GB, DDR4 |
| Flash | • 2 GB, SLC NAND |
| Fixed Ethernet port | • 3 x GE electrical ports, 10/100/1000 Mbit/s auto-sensing • 2 x GE combo |
| Fixed serial interface | • 2 x RS485 or RS232 (isolated; switching between RS485 and RS232 is controlled through software) |
| Alarm port | • One DI port (passive contact input) • One DO port (industrial terminal, supporting normally open and normally closed) |
| USB 3.0 | • 1 |
| Console port | • 1 |
| SIM card | • Micro-SIM |
| RTC/Overtemperature alarm | • Supported |
| Global positioning system | • BeiDou, GPS, Galileo, and GLONASS |
| Reset/Configuration | • Reset/Configuration button: used to manually restore factory default settings (hold down for at least 5 seconds) or to reset the router (hold down for less than 5 seconds). |
| M.2 hard drive interface | • Supported • M.2 2242 SSD (using a SATA bus; industrial-grade SSDs provided by customers), scalable up to 256 GB |
| Power supply | • Dual DC power supplies: 9.6 V to 60 V (industrial terminal) |
| Dimensions (H x W x D) | • 44 mm x 150 mm x 133 mm (1.73 in. x 5.91 in. x 5.24 in.) |
| Net weight | • 1.1 kg |
| Typical power consumption | • < 8.5 W (excluding optical modules) |
| Installation mode | • DIN/wall-mounted |
| Storage temperature | • –40°C to +85°C |
| Operating temperature | • –40°C to +70°C |
| Operating humidity | • 5% to 95% (non-condensing) |
| IP rating | • IP40 |
| EMC standards compliance | • IEEE 1613 • IEC 61850-3 • EN 61000-6-5 (2009+2013) |
| Safety regulations | • IEC 60950-1 • IEC 61850-3 |
| Certification mark | • Conformite Europeenne (CE) |
| EC-IoT parameters | |
| Maximum built-in flash for containers | • 1 GB |
| Scalable storage | • Up to 256 GB (M.2 hard drive interface) |
| Maximum built-in memory for containers | • 1.5 GB |
| Basic functions | • Supports LXC and Docker • Installing, uninstalling, starting, and stopping apps • Installing, uninstalling, starting, and stopping containers • Upgrading apps in overwrite mode and incremental mode |
| Advanced functions | • Allocating CPU cores to containers • Adjusting container storage and memory resources • Deploying multiple containers interconnected through message buses |
| Security functions | • Container disk encryption • Container and app signature verification |
| IoT protocols | • MQTT • CoAP |
| Support for secondary development | • Standard Debian-based development environment, support for secondary development • Mainstream programming languages: C/C++, etc |
| Software parameters | |
| Basic features | • IPv4 • TCP/UDP • Socket • ARP • ICMP • DHCP • NAT • NETCONF |
| Unicast routing | • Static route |
| Security and reliability | • Non-privileged container • Protocol packet protection • ACL • CPU attack defense • Blacklist/Whitelist • Packet filtering firewall • Key component management • Hardware random number • Dual-partition backup • Hard drive data encryption |
| Configuration maintenance | • CLI, SSH v2 terminal • User operation logs • System status monitoring • Remote management through Agile Controller-IoT • USB-based deployment |
| Firmware management | • Local and remote firmware upgrade |
| Event alarm | • System log |
| Hardware parameters | |
| Operating temperature | • –40°C to +70°C |
| Relative operating humidity | • 5% to 95% (non-condensing) |
| Storage temperature | • –40°C to +85°C |
| Rated voltage range | • 200 V AC to 240 V AC (phase-A power supply) |
| Working frequency | • 50 Hz/60 Hz |
| Output power | • 36 W |
| Maximum power consumption | • < 6 W |
| Power output port | • 12 V DC (industrial terminal) |
| Ethernet port | • 100 Mbps (RJ45) • Connecting to the AR502H through the Ethernet port (used for internal cascading) |
| Fixed serial interface | • 1 x RS485 (isolated) |
| IP rating | • IP40 |
| LED indicators | • 1 x PWR • 1 x SYS • 1x Tx • 1 x Rx |
| Dimensions (H x W x D) | • 44 mm x 150 mm x 133 mm (1.73 in. x 5.91 in. x 5.24 in.) |
| Net weight | • 0.5 kg |
| PLC-IoT interface parameters | |
| Protocol compliance | • IPv6, 6LoWPAN • DTLS • CoAP |
| PLC type | • Huawei broadband PLC |
| Modulation format | • OFDM |
| Frequency range | • 0.7 to 12 MHz |
| PLC cable connection | • Three-phase four-wire |
| Tx power | • PSD ≤ –45 dBm/Hz |
| Receive sensitivity | • > 0.2 mVpp |
| Application-layer rate | • 100 kbps to 1.8 Mbps |
| Software parameters | |
| Networking | • Multi-level networking • Automatic traffic steering • Dynamic topology optimization • Star networking topology • Domain-based networking: Each PLC end module can form independent networks of different domains in the same frequency band, without interference. |
| IPv6 | • Access to PLC nodes based on IPv6 addresses • 6LoWPAN compression and fragmentation |
| Deployment of plug-and-play devices | • Plug-and-play low-voltage devices |
| Transformer district identification | • Software-based transformer district identification |
| Power outage reporting | • Supported |
| Access authentication | • Digital certificate-based authentication (authentication with the AR502H) • DTLS authentication (authentication with the AR502H) |
| Data security | • AES128-based data encryption • Integrity check |
| Whitelist | • Enabling and disabling a whitelist • Adding records to, deleting records from, and querying records in a whitelist • Configuring a whitelist based on the module MAC address, module serial number, and end device ID |
| Management and maintenance | • Configuring and querying PLC network parameters, such as the network topology • Remotely obtaining PLC site information • Self-healing of PLC networks and PLC sites |
AR502H-5G : 2*RS485 (or 2*RS232), 1*DI/DO, 3*GE (10/100/1000M RJ45), 2*GE COMBO, 1*5G (dual SIM), 1*USB3.0, GPS/GLONASS/BDS, 9.6-60VDC
