HOTLINE
0909648899 028 62578355
Thiết bị không dây Indoor Wireless Access Point Fortinet FortiAP 431F (FAP-431F)
| Mã sản phẩm | FAP-431F |
| Hardware | |
| Hardware Type | Indoor AP |
| Number of Radios | 3 + 1 BLE |
| Number of Antennas | 5 Internal + 1 BLE Internal |
| Antenna Type and Peak Gain | PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
| Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Radio 1 Capabilities | - Frequency band: 2.4GHz - Channel width: 4x4 20/40MHz - Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 |
| Radio 2 Capabilities | - Frequency band: 5.0GHz - Channel width: 4x4 20/40/80MHz and 2x2 160MHz contiguous - Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 |
| Radio 3 Capabilities | Frequency band: 1x1 2.4/5.0 Bands, scan only |
| Maximum Data Rate | - Radio 1: up to 1147 Mbps - Radio 2: up to 2402 Mbps - Radio 3: Scanonly |
| Bluetooth Low Energy Radio | Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power |
| Interfaces | - 1x 10/100/1000/2500 Base-T RJ45 - 1x 10/100/1000 Base-T RJ45 - 1x Type A USB, 1x RS-232 RJ45 Serial Port |
| Power over Ethernet (PoE) | - 1 port powered by 802.3af - No USB support, Operate in 2x2 mode with reduced power R1/R2 17dBm(Tx power) or Single 802.3af PoE: 2x2, max TX power 17dBm, no USB |
| Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) |
| EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/ EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication | WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist |
| Maximum Tx Powerr (Conducted) | - Radio 1: 2.4GHz: 24 dBm / 251 mW (4 chains combined) - Radio 2: 5GHz: 23 dBm / 200 mW (4 chains combined) - Radio 3: NA |
| IEEE Standards | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz |
| SSID Types Supported | Local-Bridge, Mesh, & Tunnel |
| Per Radio Client Capacity | 512 per Radio 1 and Radio 2 |
| Cellular Co-existence | ✔ |
| Reset Button | ✔ |
| LED Off Mode | ✔ |
| Advanced 802.11 Features | |
| OFDMA | ✔ (UL and DL) |
| 2.4 GHz OFDMA | ✔ |
| Spatial Reuse (BSS Coloring) | ✔ |
| HE-MU-MIMO | ✔ |
| UL MU-MIMO 802.11ax mode | ✔ |
| DL-MU-MIMO | ✔ |
| Enhanced Target Wake Time (TWT) | ✔ |
| ZeroWait DFS/Agile DFS | ✖ |
| Wireless Monitoring Capabilities | |
| Rogue Scan Radio Modes | Background, Dedicated |
| WIPS / WIDS Radio Modes | Background, Dedicated (recommended) |
| Packet Sniffer Mode | ✔ |
| Spectrum Analyzer | ✔ |
| Dimensions | |
| Length x Width x Height | 8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm) |
| Weight | 2.16 lbs (0.98 kg) |
| Mounting Options | Ceiling, T-Rail, and Wall |
| Included Accessories | Mount kit for Ceiling, T-Rail and Wall |
| Environment | |
| Power Supply | SP-FAP400-PA-XX or GPI-130 |
| Power Consumption (Maximum) | 24.5 W |
| Humidity | 5–90% non-condensing |
| Operating / Storage Temperature | 32–113°F (0–45°C) / -31–-94°F (-35–70°C) |
| Directives | Low Voltage Directive • RoHS |
| UL2043 Plenum Material | ✖ |
| Mean Time Between Failures | >10 Years |
| IP Rating | N/A |
| Surge Protection Built In | ✔ |
| Hit-less PoE Failover | ✔ |
| Certifications | |
| WiFi Alliance Certified | No |
| DFS | FCC, IC, CE, Japan |
| SKU | Description |
| FC-10-F431-247-02-DD | 24x7 FortiCare Contract |
| SP-FAP400-PA | AC Power Adapter for FAP-431F |
- FAP-431F Indoor Wireless AP - Tri radio (2x 802.11 a/b/g/n/ac/ax, 4x4 MIMO and 1x 802.11 a/b/g/n/ac Wave 2, 1x1 MU-MIMO), internal antennas, 1x 10/100/1000/2500 Base-T RJ45, 1x 10/100/1000 Base-T RJ45, BT/BLE, 1x Type A USB, 1x RS-232 RJ45 Serial Port. Ceiling/wall mount kit included. For power order: 802.3at PoE injector GPI-130 or AC adapter SP-FAP400-PA.
- FC-10-F431F-247-02-DD - 24x7 FortiCare Contract
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
Liên hệ để có giá tốt
