OAW-AP1232-RW - Alcatel-Lucent AP1232 802.11ac Indoor Access Point :
Thiết bị Wi-Fi Alcatel-Lucent OmniAccess Stellar AP1232 Indoor Access Point (OAW-AP1232-RW)
Model | AP1232 (OAW-AP1232-RW) |
Radio specification | • AP type: Indoor, tri radio, dual 5 GHz 802.11ac 4x4:4 MU-MIMO and 2.4 GHz 802.11n 4x4:4 MIMO • 5 GHz: Four spatial stream multi user (MU) MIMO for up to 1733 Mb/s wireless data rate to up to three MU-MIMO capable client devices simultaneously • 5 GHz: Four spatial stream Single User (SU) MIMO for up to 1,733 Mb/s wireless data rate to individual 4x4 VHT80 or 2x2 VHT160* client devices • 2.4 GHz: Four spatial stream single user (SU) MIMO for up to 800 Mb/s wireless data rate to individual 4x4 VHT40 client devices (600 Mb/s for HT40 802.11n client devices) |
Interfaces | • 1x 100/1000/2500Base-T autosensing (RJ-45) port, Power over Ethernet (PoE) • 1x 10/100/1000Base-T autosensing (RJ-45) port, Power over Ethernet (PoE) • 1x Bluetooth Low Energy (BLE) radio, integrated antenna ¬ 9.5 dBm transmit power (typical, basic rate) ¬ -92.5 dBm(Typical) receive sensitivity • 1x USB 2.0 (Type A connector) • 1x management console port (RJ-45) • Reset button: Factory reset • Kensington security slot • 8 x RP-SMA Antenna connectors |
Antenna | • External 4×4:4 @ 2.4 GHz, dual 4x4:4 @ 5 GHz 8 RP-SMA connectors for external dual band antennas. |
Power | • Supports direct DC power and Power over Ethernet (PoE) • When both power sources are available, DC power takes priority over PoE • Maximum (worst case) power consumption: ¬ 27.6 W (PoE or DC) ¬ Excludes power consumed by external USB device; USB with 500mA load can add up to 2.9 W ¬ Maximum power consumption in idle mode: 13.5 W ¬ Maximum power consumption in idle mode: 13.5 W • Direct DC source: 48 V DC nominal, ±5% • Power over Ethernet (PoE): ¬ 48 V DC (nominal) 60W/802.3at compliant source; If PoE PSE side does not support LLDP, AP would be powered by 30W/802.3at ¬ Unrestricted functionality with 802.3 at High PoE (4-pair) ¬ The USB port is disabled and all the three radio will operate in 2x2:2 mode when the AP is powered by 30W 802.3at PoE source. |
Mounting | • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16- inch flat T-bar drop-tile ceiling. • Optional mount kits for Open Silhouette and Flanged Interlude. • Optional mount kits for flat-surface (wall). |
Environmental | • Operating: ¬ Temperature: 0°C to 45°C ¬ Humidity: 5% to 90% non-condensing • Storage and transportation: ¬ Temperature: -40°C to +70°C |
Dimensions/Weight | • Single AP excluding packing box and accessories: ¬ 230 mm (W) x 230 mm (D) x 47 mm (H) ¬ 1400 g • Single AP including packing box and accessories: ¬ 283 mm (W) x 267 mm (D) x 80 mm (H) ¬ 1775 g |
OAW-AP1232-RW : Indoor High-end Enterprise 802.11ac MU-MIMO AP, Tri-Radio, 11n 4x4:4 + 11ac 4x4:4 + 11ac 4x4:4, 2.5GbE+1GbE, integrated BLE radio, 1x USB, 1x Console, antenna connectors.
OAW-AP1231-RW - Alcatel-Lucent AP1231 802.11ac Indoor Access...
Liên hệ để có giá tốt
OAW-AP1222-RW - Alcatel-Lucent AP1222 802.11ac Indoor Access...
Liên hệ để có giá tốt
OAW-AP1201-RW - Alcatel-Lucent AP1201 802.11ac Indoor Access...
Liên hệ để có giá tốt