Danh mục

Planet IGTP-802T: 1000BASE-SX to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (SC,MM) -550m ● 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af/at PoE+ ● 1x 1000BASE-SX SC Fiber interface.

Giá bán : Liên hệ để có giá tốt
Tình trạng : Còn hàng

Thông số kỹ thuật
Tài liệu liên quan

Bộ chuyển đổi quang điện Công nghiệp Planet IGTP-802T

Model	IGTP-802T
Ethernet Interface
Copper	10/100/1000BASE-T Ethernet TP interface. Maximum 100m distance Auto-negotiation, auto MDI/MDI-X with PoE injector function
1000BASE-X Fiber-optic Connector Type	SC
Fiber Cable	Multi-mode: 50/125μm or 62.5/125μm optic fiber
Fiber Cable Distance	220m & 550m
Fiber Optical Frequency	850nm
Launch Power	Max. -3dBm Min. -10dBm
Receive Sensitivity	-20dBm
Maximum Input Power	-3dBm
Power Over Ethernet
PoE Standard	IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
PoE Power Output	52V DC: 15.4 watts 52V DC: 30 watts
PoE Power Supply Type	End-span
Power Pin Assignment	1/2(+), 3/6(-)
PoE Power Budget	30 watts
Hardware Specifications
Speed	Twisted-pair: 10/20Mbps for half/full duplex 100/200Mbps for half/full duplex 1000/2000Mbps for full duplex Fiber Optic: 200Mbps / 2000Mbps for full duplex
Flow Control	Back pressure for half duplex mode IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size	9K
Dimensions (W x D x H)	135 x 87 x 32 mm
Weight	416g
Unit Input Voltage	12 ~ 48V DC 24V AC
Power Consumption	System on: AC 24V:4.5W/15BTU DC 12V:4.6W/15BTU DC 48V:4.5W/15BTU Full Loading: AC 24V:23.5W/80BTU DC 12V:48W/163BTU DC 48V:47.5W/162BTU
DIP Switch	OFF: LFP (Link Fault Passthrough) disable ON: LFP (Link Fault Passthrough) enable 　　FEF (Far End Fault) works with LFP to prevent data loss LFP is turned off by default on the DIP switch.
Enclosure	IP30 metal case
Installation	DIN-rail kit and wall-mount ear
ESD Protection	6KV DC
Alarm	Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V
Cables	10/100/1000BASE-T: 　2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters) 　EIA/TIA-568 100-ohm STP (maximum 100 meters) 100BASE-FX/1000BASE-SX/LX: 　Multi-mode: 50/125μm or 62.5/125μm optical fiber 　Single-mode: 9/125μm optical fiber
Environments & Standards
Protocols and Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy Efficient Ethernet (EEE)
Stability Testing	IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration)
Temperature	Operating: -40~75 degrees C Storage: -40~85 degrees C
Humidity	Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing)
Regulatory Compliance	FCC Part 15 Class A, CE

Data sheet Planet IGTP-802T

Những tính năng chính Industrial Media Converter Planet IGTP-802T

Physical Port

1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af /802.3at PoE+ Injector
1 1000BASE-SX/LX SC Fiber interface (IGTP-802T/IGTP-802TS)

Power over Ethernet

Complies with IEEE 802.3at/af PoE Plus end-span PSE
1 IEEE 802.3at/af device powered
Supports PoE Power up to 30.8 watts for PoE port
Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet port
Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation
Remote power feeding up to 100m
IEEE 802.3at/af splitter devices compatible

Layer 2 Features

Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode on RJ45 port
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

Hardware

LED Indicators
- System: Power 1, Power 2 (Green) and Alarm LED (Red)
- Fiber port: LNK/ACT (Green)　
- 10/100/1000BASE-T port: LNK/ACT, 1000 LNK/ACT (Green). PoE: Power-in-use (Amber)
DIP switch: LFP (Link Fault Passthrough) and FEF (Far End Fault) mode selection

Industrial Case and Installation

IP30 metal case
DIN-rail or wall-mount design
12 ~ 48V DC/24V AC redundant power with reverse polarity protection and connective removable terminal block for master and slave power
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature