31 Đường số 9, KDC Cityland, P.10, Q.Gò Vấp, TP.HCM
028 62578355
HOTLINE
0909648899  
028 62578355
Trang chủ > Sản phẩm > Thiết bị mạng Wireless > Wifi Alcatel-Lucent > OmniAccess Stellar AP1231 (OAW-AP1231-RW)

OmniAccess Stellar AP1231 (OAW-AP1231-RW)

OAW-AP1231-RW - Alcatel-Lucent AP1231 802.11ac Indoor Access Point :

  • Tri-Radio, 11n 4x4:4 + 11ac 4x4:4 + 11ac 4x4:4
  • 1 x 100/1000/2500Base-T port, PoE
  • 1 x 10/100/1000Base-T port, PoE
  • Integrated BLE radio
  • Integrated antennas
  • Giá bán : Liên hệ để có giá tốt
  • Tình trạng : Còn hàng


Thiết bị Wi-Fi Alcatel-Lucent OmniAccess Stellar AP1231 Indoor Access Point (OAW-AP1231-RW)

Model AP1231 (OAW-AP1231-RW)
Radio specification • AP type: Indoor, tri radio, dual 5 GHz 802.11ac 4x4:4 MU-MIMO and 2.4 GHz 802.11n 4x4:4 MIMO
• 5 GHz: Four spatial stream multi user (MU) MIMO for up to 1733 Mb/s wireless data rate to up to three MU-MIMO capable client devices simultaneously
• 5 GHz: Four spatial stream Single User (SU) MIMO for up to 1,733 Mb/s wireless data rate to individual 4x4 VHT80 or 2x2 VHT160* client devices
• 2.4 GHz: Four spatial stream single user (SU) MIMO for up to 800 Mb/s wireless data rate to individual 4x4 VHT40 client devices (600 Mb/s for HT40 802.11n client devices)
Interfaces • 1x 100/1000/2500Base-T autosensing (RJ-45) port, Power over Ethernet (PoE)
• 1x 10/100/1000Base-T autosensing (RJ-45) port, Power over Ethernet (PoE)
• 1x Bluetooth Low Energy (BLE) radio, integrated antenna
 ¬ 9.5 dBm transmit power (typical, basic rate)
 ¬ -92.5 dBm(Typical) receive sensitivity
• 1x USB 2.0 (Type A connector)
• 1x management console port (RJ-45)
• Reset button: Factory reset
• Kensington security slot
Antenna • Built-in 4×4:4 @ 2.4 GHz, dual 4x4:4 @ 5 GHz
 ¬ Integrated dual-band tri-radio down tilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 4.38 dBi in 2.4 GHz and 4.47 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP.
Power • Supports direct DC power and Power over Ethernet (PoE)
• When both power sources are available, DC power takes priority over PoE
• Maximum (worst case) power consumption:¬27.6 W (PoE or DC)
 ¬ Excludes power consumed by external USB device; USB with 500mA load can add up to 2.9 W
 ¬ Maximum power consumption in idle mode: 13.5 W
 ¬ Maximum power consumption in idle mode: 13.5 W 
• Direct DC source: 48 V DC nominal, ±5%
• Power over Ethernet (PoE):
 ¬ 48 V DC (nominal) 60W/802.3at compliant source; If PoE PSE side does not support LLDP, AP would be powered by 30W/802.3at
 ¬ Unrestricted functionality with 802.3 at High PoE (4-pair)
 ¬ The USB port is disabled and all the three radio will operate in 2x2:2 mode when the AP is powered by 30W 802.3at PoE source.
Mounting • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16- inch flat T-bar drop-tile ceiling.
• Optional mount kits for Open Silhouette and Flanged Interlude.
• Optional mount kits for flat-surface (wall).
Environmental • Operating: 
 ¬ Temperature: 0°C to 45°C
 ¬ Humidity: 5% to 90% non-condensing
• Storage and transportation:
 ¬ Temperature: -40°C to +70°C
Dimensions/Weight  • Single AP excluding packing box and accessories:
 ¬ 230 mm (W) x 230 mm (D) x 47 mm (H)
 ¬  1400 g
• Single AP including packing box and accessories:
 ¬ 283 mm (W) x 267 mm (D) x 80 mm (H)
 ¬ 1775 g

OAW-AP1231-RW : Indoor High-end Enterprise 802.11ac MU-MIMO AP, Tri-Radio, 11n 4x4:4 + 11ac 4x4:4 + 11ac 4x4:4, 2.5GbE+1GbE, integrated BLE radio, 1x USB, 1x Console, integrated antennas.

Data sheet Alcatel-Lucent OmniAccess Stellar AP1230 Series Indoor ultra high performance 802.11ac Wave 2 wireless access points

Sản phẩm liên quan

OmniAccess Stellar...

OAW-AP1232-RW - Alcatel-Lucent AP1232 802.11ac Indoor Access...

Liên hệ để có giá tốt

OmniAccess Stellar...

OAW-AP1221-RW - Alcatel-Lucent AP1221 802.11ac Indoor Access...

Liên hệ để có giá tốt

OmniAccess Stellar...

OAW-AP1201-RW - Alcatel-Lucent AP1201 802.11ac Indoor Access...

Liên hệ để có giá tốt

Hỗ trợ trực tuyến