Bộ phát wifi Cisco AIR-AP2802I-S-K9 - Aironet 2802i Access Point, 802.11ac Wave 2 AP w/CleanAir, 4x4:3, Internal Antenna, 2xGbE, S Regulatory Domain. Cisco Aironet 2800i Access Point Indoor environments, with internal antennas is ideal for large enterprise organizations that rely on Wi-Fi to engage with customers.
Thiết bị không dây Wifi Cisco AIR-AP2802I-S-K9
Part Number | AIR-AP2802I-S-K9 |
Integrated antennas |
Flexible radio (either 2.4 GHz or 5 GHz) - 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth - 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° Dedicated 5-GHz radio - 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth |
Interfaces |
◦ 2x100/1000BASE-T autosensing (RJ-45) - Management console port (RJ-45) - USB 2.0 (enabled via future software) |
Indicators |
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions (W x L x H) | - Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17” |
Weight | - 3.53 lb (1.6 kg) |
Environmental |
- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) - Nonoperating (storage) altitude test: 25˚C, 15,000 ft. - Operating temperature: 32° to 104°F (0° to 40°C) - Operating humidity: 10% to 90% (noncondensing) - Operating altitude test: 40˚C, 9843 ft. |
System |
- 1024 MB DRAM - 256 MB flash |
Powering options |
- 802.3at PoE+, Cisco Universal PoE (Cisco UPOE®) - 802.3at power injector (AIR-PWRINJ6=) |
Power draw |
- 26W at the PSE (22.6W at the PD) with all features enabled except for the USB 2.0 port - 30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled |
Compliance |
- Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 - Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385 - IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac - Security: 802.11i, WPA2, WPA, 802.1X, AES - Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM) - Multimedia: Wi-Fi Multimedia (WMM) - Other: FCC Bulletin OET-65C, RSS-102 |
Software |
- Cisco Unified Wireless Network Software Release 8.2.111.0 or later - Cisco IOS® XE Software Release 16.3 |
Supported wireless LAN controllers |
- Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller - Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches - Cisco Mobility Express |
802.11n version 2.0 (and related) capabilities |
- 4x4 MIMO with three spatial streams - Maximal ratio combining (MRC) - 802.11n and 802.11a/g beamforming - 20- and 40-MHz channels - PHY data rates up to 450 Mbps (40 MHz with 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 dynamic frequency selection (DFS) - Cyclic shift diversity (CSD) support |
802.11ac Wave 1 capabilities |
- 4x4 MIMO with three spatial streams - MRC - 802.11ac beamforming - 20-, 40-, and 80-MHz channels - PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
802.11ac Wave 2 capabilities |
- 4x4 MU-MIMO with three spatial streams - MRC - 802.11ac beamforming - 20-, 40-, 80, 160-MHz channels - PHY data rates up to 5.2 Gbps - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD support |
AIR-AP2802I-S-K9 : 802.11ac W2 AP w/CA; 4x4:3; Int Ant; 2xGbE S Domain